1.Use liquid abluent and soft cloth to lean the
surface, please do not use acet, ammonia, org anic abluent.
2. Any scrape on
acrylic surface, can be smoothed out by using 1500#
sand paper to polish, then
wipe toothpaste and burnish with soft cloth to
make it flashing.
3.Any water speck
on glass surface, can use light acid abluent, such as
can use lemon juice or vinegar
to wipe it out.
Method: Heating(not too
hot)-plash on water speck--use soft cloth to wipe out.
4.Please do note
to keep all nozzles no any stoppage. Any hair or other
stoppage will be weeded
out in time.
5.Do not wipe the
plated parts frequently, do not keep it touch organic solution.
6.Do not use coarse-surface
utensil/abluent contain chemical menstruum or hard granule,
to wipe acrylic surface.
7.Do not use hard
object to whack, to scratch glass parts.
8.Suggestion: before
enjoy the Jaccuzzi, let the steamer work at least 20 cycles,
then get 5-10g lemon acid, dilute
with 1.5-1.7 liters warm
water, then pour into the steamer and keep 8-12 hours, then
press the on/off to
operate the steamer, transpire
the liquid at gas style.
9.Check wire, plug,
outlet frequently if any spoiling done by mice, insects or ants.
To test if protecting
function of leakage switch
working well.
10.When water line
inside bath tray is lower than Nozzles, do not operate pump,
to avoid component burnout.
11.Check before plug
insert into electrical outlet if power voltage and pump/motor
are corresponding.
12.All wire connected
by professional person. Must have ground setting with motor.
|
|
 |